|
Product Details:
Payment & Shipping Terms:
|
The sterilizer is newly desiqned on the basis of absorbing technology of same produces in Japanese light industry it is specially applied for the second time sterilization of dairy, beverage and jelly the parts contacting packing products are all made of SUS304 stainless steel, and the large chain board and chain wheel adopt sane materials .It has the functions of anti-acid ,anti-alkali, anti-corrosion. The water tank is heated by steam,and the steam volume is automatically controlled by steam solenoid valve. The hot water can be made full use of .The whole machine has such characteristics as reasonable design, fine manufacturing, stable operation and beautiful. Technical parameters:
The first section uses water at 30 degrees;
The second part is at 50 degrees,
and the third part adopts aseptic water spray.
The outlet bottle temperature is below 40 degrees. Features
1) The chain plate is a brand product
2) The conveyor is frequency controlled
3) All nozzle and spray tubes are made of stainless steel and spray evenly
4) The catchments flume is made of stainless steel and equipped with a level alarm device
5) The spray-cooling tunnel has a spray cooling recycling water pump and steam adjustment valve
6) Steam consumption is adjusted according to the temperature
7) 304Stainless Steel machine frame and machine body...
The circular hot water is used to sterilize, the circular warm water is used to pre-cool, and the cooling water is used to cool. It is character of the low noise, accurate temperature controls, the adjustability of the sterilizing time and the automatic control system of the sterilizing temperature. The high quality stainless steel, the world famous Intralox polypropylene net belt, the high-grade spray nozzle and the Japanese and the German electricity part are applied, the entire machine quality the imported equipment.
The basic principle of this unit is that water is used as the heat exchange medium. The sterilizing water is heated through a tube type heater and is evenly sprayed on the bottle or can surface for promoting the product temperature to the sterilizing level. After sterilization, the product shall be moved to the cooling area, though spraying cold water, the product temperature is lowered down to the room temperature. All the used water shall flow back to the bottom tank for recycling.
Production cappacity | 1-5T/H | ||
Sterilizing temperature | <98°C | ||
Sterilizing time | 10-35 minute speed infinitive adjusting | ||
Cooling temperature |
20°C | ||
Cooling time |
10-25 minute speed infinitive adjusting | ||
Steam pressure | 0.4Mpa | ||
Link belt time | 0.17-10m minute speed infinitive adjusting | ||
Centrifuge blower fan | 3kw | ||
Compete weight | About6000kg | ||
Outline size | 1600×2600×2000mm |
Whole production line for juice/milk/water/yogurt/jelly
1-Water treatment
2-Mixing tank with high speed shearing
3-Homogenizator
4-Ultra-temperture sterizing
5-Storage tank with mixer
6-Filter
7-Filling machine
8-Bath sterilization machine
9-Conveyor
10-Carton packing machine
11-Date printing machine for packaging
12-Air compressor
13-Pumps
(1)100% factory tested before shipment
(2) 1 Year's Quality Warranty
(3) 2 Years of trouble free service offered
(4) Solve problems within 24 hours
Best quality+ Thoughtful service=100% trust
(1)Q: Payment Terms?
A: 100% Advanced Payment by T/T /100% by Western Union Payment /100%L/C at sight /Ways agreed by both parts ;
(2)Q:Delivery Time?
A: Within 10-15 days except QTY larger than 10Sets;If 60HZ,at least 20 days.
(3)Q:MOQ for RO system?
A: 1 set ;
Auxiliary equipment
Air compressor Pumps Date printing machine
Main system Pumps Air compressor
1Application:
1-- It can filling and sealing any shapes bag(including stand up bag with spout Straw bags).
It suitable for various liquids such as water, fruit juice, ice lolly,yogurt,soymilk, Japan Tofu,milk,beverage,liquid soap etc.
2--Full set of the sealing system adopts copper material, the heat conduction modulus is very high, so the sealing is very tight and nice..
3--The whole machine made by high quality 304 stainless steel.
4--The pipe which touch the liquid adopts the food grade standard.
5--The heat sealing blade made by special process, replaced the high temperature tape, so it will save more consumable spare parts after many years using..
6--8 nozzles,high speed max 3000bags/hour.(different size bag with different speed.)
7-- Touch screen PLC computer control system, very easy operation.
PLC : Japan Omron
Electric component : Japan Omron
Pneumatic component : Taiwan Airtac
2.Main technical parameter
Name | Filling machine |
Type | TM-8 |
Size | 1400*650*1400mm |
Weight | 180kg |